The bearing is a very important component of the pellet machine, but it is often found that the bearing is damaged during use
, Which brings inconvenience to our use, so what are the reasons for the damage of the pellet machine bearing?
1. Using brute force during installation, directly hitting the bearing with a hammer will cause great damage to the bearing.
2, the installation is not in place, the installation is deviated or the bearing is not installed in the bearing position, resulting in too small bearing clearance, or
It is that the inner and outer rings are not at the same center of rotation, resulting in different concentricity.
3. The working environment is not clean when installing the bearing, causing pollution.
4. Long-term overload operation of the bearing causes bearing aging. Failure to repair in time; improper repair.
5. Improper selection of lubricants or lubricants.
6. Open the bearing package too early before use, causing bearing contamination.
7. Lubricant or lubricating oil is used improperly during use.
8. Lubricant or lubricating oil is poorly lubricated and has not been filled in place.
9. The sealing of the bearing chamber is not strict, causing powder to enter the bearing chamber and mixing with grease, which will affect the life of the bearing.
We found that the bearing was damaged when we used the bearing of the pellet machine accessory. You can think about the reasons above.
, If we want to prolong the service life of the bearings of the pellet machine, we need to protect the bearings in daily use.
In this way, the service life of the bearing can be increased and the replacement cycle can be reduced.