Advantages of gear type automatic tapping machine:
1. The teeth with high speed, high precision and tapping can be detected by tooth gauge. It can be used for high-speed continuous circulation operation, special motor can be durable and can realize automation. One person can operate multiple equipment at the same time, which can save labor cost significantly!
2. Working principle of gear type automatic tapping machine: positive rotation - reverse - positive rotation - reverse The continuous cycle and forward rotation - reverse - stop one-way cycle have specific key switches to operate, and foot switches can be installed for selective operation. Continuous, one-way and cycle can be automatic. The operator can leave the machine completely with both hands to realize automatic operation.
3. The pitch a and B gears are fully matched with the rotation axis A and B and the main shaft according to the pitch. The vertical stability, accuracy and precision are especially high. When tapping the teeth, the forward and backward gears can operate freely without force. At the same time, it is decided by the fine processing items, which will not cause different threads of thickness and fine. For thin plate, light metal, synthetic resin and other soft products, perfect thread can be developed. At the same time, it can be equipped with multi axis machine for multi axis synchronous processing, and the production efficiency is greatly improved.
4. The high precision tapping stroke adjustment is simple, the automatic reverse device can freely adjust the tapping stroke, and the shallow hole and the low processing parts with holes can be easily adjusted. The double safety device can prevent the damage of the screw tapping. The spindle rotation, up and down, and the feed and retreat knives are equipped with double safety clutch. The spindle can stop automatically and the reverse tool will not damage the tool.