Product Introduction

The pellet mill is one of the most important machines in the wood and biomass pellet industry.

Main Parts Description

Screw feeder:

- The variable-pitch feeder is driven by a continuously variable speed hydraulic gear motor

- The whole body of the screw feeder in contact with the feed and the screw feeder shaft are made in stainless steel.

Conditioner:

- The conditioner is driven by its own motor

- The conditioner is entirely stainless steel made included shafts and paddles. To obtain, the best results from the addition of steam, the paddles of the conditioner shaft are easily adjustable.

Pellet mill Bloc:

Door: the machine door is entirely stainless steel-made with two knife assemblies

Magnet: a permanent magnet is fitted in the chute to avoid ferrous metal entering the die

Overload flap: on the feed conveyor there is an overload flap

Die holder: die holder is made in forging steel and it has a wear ring. Die holder front base is stainless steel lined to guarantee longer life

Basement: the pellet mill is built upon a heavy cast iron base that guarantees the absence from vibration

Main shaft: the front of the shaft is a chromed plate for preventing against corrosion

Drive: the pellet mill is driven by an electric motor via a V-belt transmission. Belts type 5V guarantee the transmission of the motor power with a security factor equal than 1.7

Shear pin: to protect the pelleting chamber, a shear pin is installed on the rear of the machine

Lubrication: grazing can be made by the rear of the pellet mill, through the main shaft. In this way, the machine can be lubricated without stop the motor.

Parameter

	SZLH320	SZLH350	SZLH400	SZLH420	SZLH508
Production	0.2-0.5t/h	0.3-0.8t/h	0.8-1.2t/h	1.0-1.5t/h	1.5-2.0t/h
Main power	37Kw	45/55Kw	75Kw	90Kw	110/132Kw
Feeder Power	0.75Kw	1.1Kw	1.5Kw	2.2Kw	2.2Kw
Pellet Size	Φ8-16mm	Φ8-16mm	Φ8-16mm	Φ8-16mm	Φ8-16mm